1 Inch Handlebars Chubby T-bar Club Style 8 Inch Black for Harley Davidson

Made in The Netherlands

Westland Customs Special: The Chubby T-Bar. 38mm thick! Handmade, custom made for your Harley-Davidson.
Due to the unique eccentric arrangement of the handles, all brake and clutch cylinders of all construction years will fit.

Note: The distance between the risers is 3-1/2"! This is specific to Harley-Davidson!
All holes are pre-drilled, wiring can go straight through! All 1 inch controls fit on it.

Thes handlebars are made of high-quality tubular steel, with a material thickness of at least 2 mm, TIG welded by hand.
All our handlebars are produced entirely in our own factory in the Netherlands and meet the highest quality standards.

Measurements in millimeters:
A= Width, B= Height, C= Pullback, D= Mounting Distance

A= 870
B= 220
C= 110
D = 88.9 (3.5")

The handlebar has slotted holes to hide your wiring and is adapted for an electronic throttle (Harley-Davidson).

Please note that it may be required to extend your wiring, cables and/or pipes! Check this to be sure, especially in the case of an ape pendant.
This handlebar fits all motorcycles with 1” (25.4mm) riser grip, levers and grips.

Material:
High-quality cold strip steel (Certified EN 10305-3 CR1 E195 S5)
Tubes of 38x2mm, 25.4x2mm
Black powder coating

Pay attention; Westland Customs does not accept any liability with regard to the sharp parts on or on this handlebar! Assembly and use is at all times at your own risk!